Master Ikea Bekvamboo Curtain Rod Installation: Step-by-Step Guide

Tidy up your space and let the natural light flow with the Bekvam's elegant simplicity. IKEA's Bekvöst curtain rod offers a stylish and functional solution to enhance your windows. Here's a comprehensive guide on how to install your Bekvöst curtain rod with confidence.

Before you begin, gather your curtain rod, wall brackets, screws, a power drill, a screwdriver, and a pencil. Let's dive into the installation process and transform your windows in no time.

Measuring and Preparation

Accurate measurement is key for a perfect fit. Measure the width of your window, and add roughly 4-6 inches on each side for your curtains to comfortably drape. This is your curtain rod's width. Now, let's prepare your wall for the installation.

Use a tape measure and pencil to mark the points where your brackets will go. Typically, the top of your curtain rod should be about 3-6 inches above the window frame to showcase your curtains nicely.

Marking Wall locations

Starting from your desired position, mark the brackets at equal distances apart along the length you measured. Ensure they're level with each other as this will affect how your curtain rod hangs.

For BETTER measurement, check if the rod comes with pre-drilled holes. If yes, align these with your marked positions. If not, use the width of the bracket itself for the distance apart.

Creating Pilot Holes

Use your power drill to create pilot holes at your marked spots. This helps prevent damage to your wall and ensures the screws go in smoothly. Choose a drill bit slightly narrower than your screws' diameter for this.

FOR EXAMPLE, if you're using 1/4" screws, a 9/64" or 3.5mm drill bit should work well. Drill at a 90-degree angle, applying gentle pressure until you reach the depth of your pilot hole. Be careful not to drill too deep.

Installing the Wall Brackets

Now that you've created pilot holes, it's time to install your wall brackets. Line up the bracket's keyhole slot with the pilot hole on your wall. Hold the bracket in place and start screwing in the screw.

USE A DRILL OR SCREWDRIVER that's compatible with your screw type. Apply firm but gentle pressure as you turn it clockwise until it's snug but not overly tight. Repeat this process for all your brackets.

Securing the Brackets

After all brackets are in place, give them a gentle tug to ensure they're securely attached to the wall. If you feel any wobbliness, try tightening the screws a bit more.

PREVENT DAMAGE to your wall and curtain rod by ensuring brackets are flush against the wall when tightened.

Attaching the Curtain Rod

Once your brackets are inplace, it's time to attach the curtain rod. Lift your rod up to the brackets. The دي (D-hook) ends of the rod should fit securely into the wall bracket's keyhole slot.

PUSH UPWARD to securely fit the D-hooks into the keyhole slots. The rod should sit comfortably and securely on the brackets. If it feels loose, ensure brackets are firmly screwed in and try again.

Hanging Your Curtains

Now that your Bekvöst curtain rod is in place, you're ready to hang your curtains. Unfold your curtains and line up the top (header) with the rod. Slip the header onto the rod, ensuring it's centered and even.

ADJUST YOUR CURTAINS as desired to ensure they sit perfectly on your window. Take a step back and admire your newly transformed space. Your Bekvöst curtain rod is now complete, bringing a touch of Sweden to your home.

Regularly clean your curtains and rod to maintain their good looks. With proper care, this minimalist design will continue to add a touch of Scandinavian charm to your windows for years to come. Happy decorating!